Breathalyzer Dräger Alcotest 7510 configurable modular system

Manufacturer Dräger
Weight 1.2 kg
Article number 100396
  • Professional quality by the German manufacturer Dräger
  • Hygienical and simple application
  • Incl. voucher for 1 calibration and 25 additional mouthpieces
  • Allows conduction of passive tests
  • Works with regular AA batteries or rechargable NIMH batteries
Sensor class: XL Sensor type: Fuel cell technology Measurement accuracy: ± 0,003 % BAC

0 € / set

Bitte wählen Sie die gewünschte Variante aus, um das Produkt in den Warenkorb zu legen.
Zu den Varianten

- Breathalyzer Dräger Alcotest 7510
- Mouthpiece with orientation to the right
- Auxiliary alkaline batteries
- Carrying case
- 3 mouthpieces
- USB cable
- Software CD

In addition, you will receive:
- A calibration voucher worth € 45
- 25 more mouthpieces
- Warranty extension to 3 full years on sensor and device (if send the device to us for service on a regular basis)

All measured values determined with this alcohol tester are always only a guide value and are not legally binding.

ACE Instruments recommends that you test the alcohol tester at least once a week, regardless of whether you have drunk alcohol or not. The device should also be calibrated regularly to maintain measurement accuracy.

Why is a calibration necessary?
Calibration is not mandatory, but the accuracy of the integrated sensor decreases continuously without calibration and the warranty expires if the calibration intervals are not observed. 

Any alcohol tester purchased from ACE Instruments can also be calibrated by ACE Instruments. Of course, we also calibrate instruments that have been purchased elsewhere, as long as these instruments are identical in construction to those sold by ACE Instruments. You can see the due date of the next calibration on the calibration sticker on your alcohol tester. If the sticker is missing, the calibration should be done 6 months after the purchase date: e.g. purchase date: 13.05. = next calibration on 13.11. and afterwards on 13.05. of the following year. You can send the instrument for calibration to the service address given under . There you will also find further information on calibration, the prices for the calibration service and the calibration return form.

Which factors influence the measurement accuracy?
- The more often the alcohol tester is used, the more the zero point shifts.
- At high alcohol concentrations, the zero point shifts more strongly.
- The sensitivity of the sensor also decreases in the case of devices that are used little or not at all.
- Amount of alcohol
- Period of alcohol consumption
- sex
- age
- weight
- body size
- drinking habit
- Health condition
- Vitality of the liver
- lung size
- dietary intake during alcohol consumption
- Influence of drugs

Further influencing factors

Some substances contained in tobacco such as methanol and acetaldehyde, in sweets substances such as isoprene or the 2-butanol often present in flavours and perfumes can influence the measurement result. Some other residual gases (caused by cigarette smoke, mint, etc.) in the mouth can also affect the sensor and thus the test result. If you have eaten or drunk something before a breath test, we recommend rinsing your mouth with water or waiting at least 15 minutes before the test to get a correct result.

Important notes on test procedure and self-assessment

After the last sip of alcohol, you should wait at least 15 minutes, as there may still be residual alcohol in the oral cavity that influences the measurement result. Smoking should also be avoided before a test, as cigarette smoke damages the sensor. A new mouthpiece should be used for each test - not only for hygienic reasons, but also because an already used mouthpiece can influence the next measurement result. There could be residual alcohol in the mouthpiece, which will influence the new test result if the same mouthpiece is used again (e.g. if a person is sober, this could indicate alcoholisation).

If the display shows "FLO" or "Flow", the breath sample delivered was not sufficient or was terminated too early. Blow your breath constantly for about 4 seconds and preferably as if you were whistling without sound. The breath test is finished as soon as you hear a double beep.

If the same person performs 2 tests in a row, they should wait at least 3 minutes between the two tests, as too short a waiting time can result in different readings being displayed. After a test, the air exhaled from the lungs is no longer enriched with the same alcohol content as in the previous test. Therefore, an immediate second test will show a lower reading.

Why the perceived alcoholisation and the measurement result often doesn`t or cannot not coincide
In an alcohol test, there are many different factors that influence the level of the measured value. In addition to sex, age, height and weight, these include the percentage of body fat and the percentage of body fluid. 

In addition, the general physical and mental condition as well as the respective daily condition must also be taken into account. In addition, the type of meals before the test (type of content and level of stomach) and the intake of medication can influence the measured value. 

Other influencing factors naturally include the type of drink (percentage of alcohol content in the drink as well as its carbonic acid and sugar content), drinking speed and the individual length of time dependent on the test person with regard to alcohol build-up and breakdown in the body.

Some people quickly have an increased alcohol content in their blood, others take longer to detect alcoholisation. About 40-50% of the alcohol consumed is in the body within 15 minutes, after 30 minutes it is 65% and after 70 minutes at the latest the previously consumed alcohol is 100% absorbed in the body. However, it should also be noted that some people - partly genetically determined - quickly reduce the alcohol content in the blood again, whereas others still have an increased alcohol content in the blood even after a longer period.

A Professional Breathalyzer by Dräger

Dräger Alcotest 7510 is a hand-held breath alcohol measuring device for applications in the pre-test area.
Due to the very high precision of the device, a wide range of applications is possible: Dräger Alcotest 7510 is suitable for use by authorities as well as application in commercial and industrial areas. Depending on official and market-specific requirements, the results of the measurements can also be used for judicial use.
The device is hygienic and easy to use. It delivers fast, accurate and reliable results in a clearly legible format. Flexible data management, high storage capacity as well as the possibility of wireless data transmission to the Dräger Mobile Printer or a PC allow easy adaptation to different national and international specifications.
For satellite-based determination of the device position, Dräger Alcotest 7510 can be equipped with a separate GPS module. The lithium-ion batteries allow a large number of measurements.
Thanks to the latest Dräger sensor technology, Dräger Alcotest 7510 ensures fast and precise measurements.
A built-in heating element counteracts condensation effects and allows quick breath tests even at low temperatures.
Thanks to an improved sampling technology, which is driven by a piezo-motor, residual alcohol can be detected and displayed after the breath probe.

Scope of Delivery

- Breathalyzer Dräger Alcotest 7510
- Mouthpiece with orientation to the right
- Auxiliary alkaline batteries
- Carrying case
- 3 mouthpieces
- USB cable
- Software CD

In addition, you will receive:
- A calibration voucher worth € 45
- 25 more mouthpieces
- Warranty extension to 3 full years on sensor and device (if send the device to us for service on a regular basis)

Hygienic and Secure

The large, disposable mouthpiece automatically ensures a safe, hygienic distance between the hand of the operator and the test person.
A special spacer grid prevents a direct contact between the test person's lips and the device. Thus, the product meets maximum hygiene requirements.
After testing, a special ejection system allows a quick and easy removal of the standard mouthpieces without the operator coming into contact with them.
If a test person is not able or willing to participate in a test, a measurement can also be performed passively without mouthpieces.

An Efficient Ally with an Ergonomic Design

Dräger Alcotest 7510 can be used either with standard alkaline batteries or rechargeable NiMH batteries.
In order to meet the requirements of frequently repeated applications, for example in institutions, the device can be operated with new high-performance lithium-ion technology.
An innovative holding and loading tray concept offers maximum flexibility for attaching and charging the device to the wall, a vehicle or on the table.
With only three buttons, the alcohol tester is easy to use and suitable for both right and left-handed users.
For safety reasons, the breathalyzer has a non-slip rubberized surface and is additionally equipped with a hand strap.
Dräger Alcotest 7510 offers a clear, high-resolution black and white graphical display as well as a multilingual text display, which can easily be read even in bright sunlight thanks to transflective technology.

Simple Use, Outstanding Flexibility

Dräger Alcotest 7510 is characterized by short waiting times during commissioning as well as short sampling and calibration procedures.
All measurements are controlled by a simple pushbutton. Two additional buttons (UP / DOWN) allow fast and easy menu navigation.
The three LEDs in the colors red, yellow and green directly support the display.
The Dräger Alcotest 7510 can be used immediately in any environment and is ideally suited for use at temperatures from -5°C to +40°C.
The results can be wirelessly sent to the (separate) Dräger Mobile Printer or the device can be connected to a PC for fast and secure data transfers.

Enhanced Data Management

Dräger Alcotest 7510 is characterized by comprehensive data management and can capture and store a variety of information.
This makes it possible to customize the device to specific requirements.
For example, the calibration intervals, the vehicle type, the indicator, the name of the vehicle driver, as well as the location and the reasons of the measurement can be recorded.
The possibilities of the configuration are almost unlimited. The test result is stored together with these inputs as well as with a clear test number and the time and date information.

Included in the set

Breathalyzer Dräger Alcotest 7510 configurable modular system

Delivery time: Delivery time up to 4 weeks
The delivery time for this article is between 3 days and a maximum of 4 weeks. In exceptional cases the delivery time may be delayed.
Free shipping for Deutschland Deutschland
Manufacturer number 8319700



2.240,99 € / set

Go to article

Prices incl. VAT and estimated delivery costs

25 Original Draeger Slide 'n' Click Mouthpieces for 3000, 5510, 6510, 6810, 6820, 5820 & 7510

Delivery time: Article is in stock - delivery within 48 hours
Articles in stock will be sent on same day or next working day (not on Saturdays). In exceptional cases the delivery time may be delayed.
Manufacturer number 6810830



9,50 € / pack

Prices incl. VAT and estimated delivery costs